User Manual
Table Of Contents
- 1 Getting Started
- 1.1 Checking Supplied Items
- 1.2 Connecting Peripheral Device
- 1.3 System Startup and Shutdown
- 2 Explanation for Each Function
- 2.1 Front Panel
- 2.2 Rear Panel
- 2.3 IR Remote Controller
- 3 Operation
- 3.1 User Log-in
- 3.2 Quick Startup Wizard
- 3.3 Live Display Mode
- 3.4 PTZ Operation
- 3.5 Call Monitor Operation
- 3.6 Playback of Recorded Video
- 3.7 Quick Backup during Playback
- 3.8 Search Recording Image
- 3.9 DST Setting
- 3.10 Screen Saver
- 4 Setting
- 4.1 System
- 4.2 Device
- 4.3 Record
- 4.4 Network
- 4.5 Backup
- 4.6 Quick Setup
- 5 Web Client
- 5.1 Web Login
- 5.2 Web monitoring
- 5.3 Web Playback
- 5.4 Web Configuration
- 6 Pivot™ User Guide
- 6.1 PC Requirements
- 6.2 Software Installation
- 6.3 Software removal
- 6.4 Basic Operations
- 6.5 Pivot Functions
- 6.6 Pivot Setup
- 7 MAC ACS User Guide
- 7.1 System Requirement
- 7.2 Install
- 7.3 Basic Operation
- 8 Mobile Phone Software User Guide
- 8.1 iPhone application software
- 8.2 Android application software
- 9 Appendix : Network Setup for External Usage
- 10 Appendix : Specification
33 | VMAX960H CORE™ Digital Video Recorder
- Display Options- Setup OSD information in live and playback modes, transparency, spot output, sequence dwell time,
spot-out dwell time, and pop-up camera
o OSD:
Select which information to display in the OSD on each channel in Live.
Select which information to display in the OSD on each channel in Playback.
o Set the OSD’s transparency level. The higher the number, the more transparent the text will appear.
o Setup a dwell time for the OSD text, after which, the OSD will disappear.
o Setup a dwell time for the Setup Menu, after which, the Menu will disappear.
o Set sequence dwell time- Setup how long each channel will be displayed in Sequence mode, before
switching to the next view.
o Spot-out Monitor:
Spot out display mode - Supports multi display mode (Full, 4, 9, 16) on digital spot output.
Spot out channel select- Select which channels to display on spot out sequence.
NOTE
Non-selected channels will appear as covert channels with a black screen instead of video
Spot out cam popup- If camera popup is set in Sensor, Motion notify, the camera will also popup in
the Spot monitor.
Spot Monitor interval- Spot Sequence time setting
- Screen Saver Setup- See section 3.10 Screen Saver for more information.