User Manual
Table Of Contents
- 1 Getting Started
- 1.1 Checking Supplied Items
- 1.2 Connecting Peripheral Device
- 1.3 System Startup and Shutdown
- 2 Explanation for Each Function
- 2.1 Front Panel
- 2.2 Rear Panel
- 2.3 IR Remote Controller
- 3 Operation
- 3.1 User Log-in
- 3.2 Quick Startup Wizard
- 3.3 Live Display Mode
- 3.4 PTZ Operation
- 3.5 Call Monitor Operation
- 3.6 Playback of Recorded Video
- 3.7 Quick Backup during Playback
- 3.8 Search Recording Image
- 3.9 DST Setting
- 3.10 Screen Saver
- 4 Setting
- 4.1 System
- 4.2 Device
- 4.3 Record
- 4.4 Network
- 4.5 Backup
- 4.6 Quick Setup
- 5 Web Client
- 5.1 Web Login
- 5.2 Web monitoring
- 5.3 Web Playback
- 5.4 Web Configuration
- 6 Pivot™ User Guide
- 6.1 PC Requirements
- 6.2 Software Installation
- 6.3 Software removal
- 6.4 Basic Operations
- 6.5 Pivot Functions
- 6.6 Pivot Setup
- 7 MAC ACS User Guide
- 7.1 System Requirement
- 7.2 Install
- 7.3 Basic Operation
- 8 Mobile Phone Software User Guide
- 8.1 iPhone application software
- 8.2 Android application software
- 9 Appendix : Network Setup for External Usage
- 10 Appendix : Specification
31 | VMAX960H CORE™ Digital Video Recorder
4.1 System
4.1.1 System Info
The System Info sub-menu includes the following options: Date/ Time, HDMI Resolution, Language, Remote ID, Version &
System Upgrade, Video Signal, IP & MAC Addresses, Keyboard Setup, NTP Setup, Display Setup, and Screen Saver Setup.
- Date/ Time- Using the available options, manually adjust the date and time, select the display mode for the time and the
date, and select the appropriate time zone. If applicable, check the ‘USE DST’ box. See 3.12 DST Setting for more
information.
- HDMI Resolution- Select the DVR’s output resolution. DVRs support the following video resolutions: 1024x768,
1280x1024, and 1920x1080p.
- Language- Select the DVR’s display language from the available in the drop-down menu.
- Remote ID- Set the DVR’s remote ID, which should be the same as the IR Remote Control (default ID is 1).
- Firmware Version & upgrade- when a new version is available use the easy upgrade menu to upgrade your DVR. It is
always recommended to maintain your DVR up to date with the latest firmware to guarantee the DVR’s proper
functionality. To upgrade your system:
Upgrading system using USB memory stick:
1. Insert a USB drive with the firmware file formatted by FAT32 in any USB port of DVR (compatible with USB
2.0).
2. Select ‘USB’ from the Method drop down options and press the ‘Scan’ button.
3. Once the system detects the USB drive, it will display the firmware file under ‘Upgrade File Name’ and the
‘New Ver’.