User Manual

User’s Manual | 18
[9 Ch] [16 Ch]
To select a channel to view in single channel mode, click on the channel using the USB mouse. To return to the previous
display mode, click anywhere on the screen again.
To view the pop-up menu, right-click anywhere on the display screen.
NOTE
To select a channel using the mouse, perform a slow and clear click of the left mouse button.
3.3.3 Icons
The live mode display’s icons or messages will be indicated on the screen to indicate the system mode or status.
Below are the icon categories that are indicated on the monitor:
Icon to be shown
at Left-upper corner on each channel screen
Icon to be shown
at Left-bottom corner on full screen.
Continuous Recording Sequence display on
Motion Detection Recording Digital zoom on
Sensor Activating Recording Audio Channel
Continuous+ Motion Recording
Continuous + Sensor Activating
Recording
Emergency Recording
N
OTE If you cannot find any colored-mark in the top right corner of the live screen mode, then the system is not
set to record any image. Check the recording schedule or camera in the main setup menu.
To show the menu bar, move the mouse’s cursor to the
bottom of the screen. The menu bar will be displayed.
To hide the menu bar, move the mouse’s cursor away from
the menu bar.
Right-click the USB mouse to access the pop up menu.