User Manual
Table Of Contents
- 1 Getting Started
- 1.1 Checking Supplied Items
- 1.2 Connecting Peripheral Device
- 1.3 System Startup and Shutdown
- 2 Explanation for Each Function
- 2.1 Front Panel
- 2.2 Rear Panel
- 2.3 IR Remote Controller
- 3 Operation
- 3.1 User Log-in
- 3.2 Quick Startup Wizard
- 3.3 Live Display Mode
- 3.4 PTZ Operation
- 3.5 Call Monitor Operation
- 3.6 Playback of Recorded Video
- 3.7 Quick Backup during Playback
- 3.8 Search Recording Image
- 3.9 DST Setting
- 3.10 Screen Saver
- 4 Setting
- 4.1 System
- 4.2 Device
- 4.3 Record
- 4.4 Network
- 4.5 Backup
- 4.6 Quick Setup
- 5 Web Client
- 5.1 Web Login
- 5.2 Web monitoring
- 5.3 Web Playback
- 5.4 Web Configuration
- 6 Pivot™ User Guide
- 6.1 PC Requirements
- 6.2 Software Installation
- 6.3 Software removal
- 6.4 Basic Operations
- 6.5 Pivot Functions
- 6.6 Pivot Setup
- 7 MAC ACS User Guide
- 7.1 System Requirement
- 7.2 Install
- 7.3 Basic Operation
- 8 Mobile Phone Software User Guide
- 8.1 iPhone application software
- 8.2 Android application software
- 9 Appendix : Network Setup for External Usage
- 10 Appendix : Specification
17 | VMAX960H CORE™ Digital Video Recorder
3.3 Live Display Mode
3.3.1 Full HD(1080p) Live Display
Full HD Live Display can be supported in live mode by using its HD output.
NOTE
In playback mode, the maximum resolution is 960x480 / 960x576(NTSC/PAL).
<Full HD Live Display>
3.3.2 Channel Selection
Channel selection can be done by following one of the steps below:
1. CH1~CH16 buttons in the IR Remote Control.
2. 1~16 virtual buttons at the bottom of the GUI display.
The display mode can be changed by selecting the appropriate display mode from the menu bar at the bottom of the display
area.
The live images can be displayed in real-time in 1, 4, 9, 16 screen splits (depending on the model and the supported
channels). Whenever the left/right arrow button on the front panel or IR remote controller is pressed, the screen will be
sequentially changed.
[1 Ch] [4 Ch]