User Manual

VMAXAHD CORE™ User Manual | 4
1.3.2. IR Remote Controller
① Power : System ON/OFF
② DVR ID Selection
③ Numeric Button : Channel selection or Password input
④ PTZ Button
⑤ Preset Button : Select Preset on PTZ mode
⑥ Focus Button : Focus IN/OUT on PTZ mode
⑦ ZOOM Button : Zoom IN/OUT on PTZ mode
⑧ Preset Tour : Tour ON/OFF on PTZ mode
⑨ Direction Button
⑩ Enter Button
⑪ Menu Button
⑫ Return Button
⑬ Playback Button on Search mode
⑭ Search Button
⑮ Emergency Recording Button
○
16E
A
Auto-Sequence Button on Live mode
A○
17E
A
Screen Mode Button
A○
18E
A Backup Button
The picture might differ according to the specification and model
Note
User can control multiple DVRs with one IR Remote Controller.
In order to control multiple DVRs, each DVR has different Remote ID.
(The initial ID is set as “0”.)
Note
How to setup the ID # in IR Remote Controller
1) Keep pressing ID selection button for about 5 seconds.
2) Set the ID number by pressing numeric button on IR Remote Controller.
ID number is available from 000 up to 255.
3) You have to press numeric button as three-digit number format.
For example, press “000” for 0, “023” for 23, “234” for 234.
User must set REMOTE ID to match with the ID of the IR remote controller, if the user wants to use it to
control the DVR.
1.3.3. Tool Bar on Live Mode
In live view, move the mouse cursor to the bottom of the screen to show the menu bar as it appears below.




○
11
○
13
○
15




○
12
○
14
○
16
○
17
○
18

