User Manual
Table Of Contents
- Cautions
- Read Before System Operation
- Signs of Caution and Warning
- General Warning
- Cautions about the Power
- 1. Getting Started
- 2. Startup Wizard
- 3. Operation
- 4. Setting
- 5. Web Surveillance through M/S IE
- 6. Frequenty Asked Questions
3 | VMAXAHD CORE™ User Manual
1.2 System Startup
After connecting peripheral devices such as cameras, monitors and a mouse to the DVR, power the DVR by
connecting the 12V adaptor to the device. The login window will appear as shown below.
To login, enter the username and password in the popup screen. There is only one Administrator Account
configurablein the DVR. It is assigned with an unchangeable User ID marked as “ADMIN”. The factory default
password is “1234”. The Administrator account has full access to the DVR and its configurable parameters
such as creating new users and assigning rights to users. If DVR is set as AUTO LOGIN, login process is not
necessary.
Caution
It may take a few minutes to startup the system after turning on the power. If the network is not
connected or the user sets the network configuration as DHCP when no DHCP server is in the
network.
Note
1) Do not forget the administrator’s password that was set for the first time. In case the password is
forgotten, please contact your local dealer for help.
2) Refer to the “Section 4.1.2 User” for AUTO LOGIN and AUTO LOGOFF.
1.3 Button Explanation
1.3.1. Front Panel
*
The picture might differ according to the specification and model
① Power : System ON/OFF
② LED Indicator : Indicates system status.(Power, Record and Network status)
③ Function Button : E-Backup, Search, Screen display mode, Menu, Return
④ Direction Button : Move to the desired menu position
⑤ Enter Button : Select value or setting
⑥ USB Port : For backup, upgrade and so on.