User Manual
Table Of Contents
- Cautions
- Read Before System Operation
- Signs of Caution and Warning
- General Warning
- Cautions about the Power
- 1. Getting Started
- 2. Startup Wizard
- 3. Operation
- 4. Setting
- 5. Web Surveillance through M/S IE
- 6. Frequenty Asked Questions
54
5. Web Surveillance through M/S IE
The system has a built-in web server by itself. This allows you to access the system using an ordinary
web-browser via network for live monitoring, playback or remote configuration without installing any
additional software.
5.1 Web Login
In an Internet Explorer page, type the DVR’s IP address or DDNS address in the address bar. When the login
page appears, enter the user ID and password. The default user ID and password are “admin” and no
password. After login, download & install Active-X file
.
Active-X Installation
1. If the P/C doesn’t have Active-X installed, an installation guide message will automatically appear,
prompting you to install the latest version of Active-X.
2. Click “install” and follow the installation wizard to complete the Active-X installation.
3. To avoid download restructions, make sure that Active-X controls are enabled in the web browser’s
security settings. Go to “Tools > Internet Options > Security > Internet > Customer Level” and enable all
Active-X controls and plug-ins as shown below.