User Manual
Table Of Contents
- Cautions
- Read Before System Operation
- Signs of Caution and Warning
- General Warning
- Cautions about the Power
- 1. Getting Started
- 2. Startup Wizard
- 3. Operation
- 4. Setting
- 5. Web Surveillance through M/S IE
- 6. Frequenty Asked Questions
28
④ The system will automatically check the FTP server for a newer firmware everyday at
user-specified hour and will alert the user if a newer version is found.
⑤ Click [START] button to proceed automatic firmware upgrade. After completed, the
system will reboot.
VIDEO SIGNAL
Check the right video signal (NTSC or PAL). This setting should be matched the [NTSC/PAL] Selection
Switch located on the rear panel. Video images might heavily shake and blink if NTSC/PAL is not properly
set.
IP ADDRESS
Shows the DVR’s IP Address. It can be set at ‘MENU>NETWORK>NETWORK’.
MAC ADDRESS
Shows the unique identity number for the DVR.
KEY PAD BEEP
User can turn on or turn off the beeping sound of key pad.