User Manual
Table Of Contents
- Cautions
- Read Before System Operation
- Signs of Caution and Warning
- General Warning
- Cautions about the Power
- 1. Getting Started
- 2. Startup Wizard
- 3. Operation
- 4. Setting
- 5. Web Surveillance through M/S IE
- 6. Frequenty Asked Questions
27
VERSION
View the DVR’s current firmware verison and update to a newer version via DVD/CD/USB Memory
Stick/FTP server.
Caution
Do not click CANCEL button during firmware upgrade. It may cause serious damage to
the system!!!
Settings may have been changed to factory default. It is recommended to check the settings
and operating condition of the DVR after firmware upgrade.
Procedure
How to upgrade system firmware using USB memory stick
① Input USB thumb-drive which was formatted by FAT/FAT32 in any USB port of DVR
(compatible with USB 2.0)
② Select “USB” from the Method drop down options and press the “Scan” button.
③ Once the system detects the USB drive, it will display the firmware file under
“CURRENT VER” and the “NEW VER”.
④ Click START to begin the upgrade process.
(*) It is not allowed to use the partitioned USB memory.
How to upgrade system firmware using Digital Watchdog’s Automatic Firmware
Upgrade via FTP Server:
① Select FTP in the drop-down options under “METHOD”.
② Enter the FTP’s address: ftp.dwcc.tv
and enter the username and password (these
should be filled out automatically). Username: vmaxahd, Password: vmaxahd
③ Enter the CHECK TIME that is convenient for you and then click the [SAVE] button.