User Manual

37 | VMAX A1 Plus™ DVR
 No: Port Number of the Serial connection. For example: NO1 = COM1, NO4 = COM4.
 Cam: Assign a camera to the transaction verification device.
 Type: Connection type between DVR and transaction verification device.
 Protocol: Communication protocol between DVR and transaction verification device.
 Save: Enable or disable the DVR to save the transaction data.
 Show: Enable or disable the DVR to display the transaction data.
 Setup
 NO: ID# of transaction verification device.
 Camera: Select the camera to assign to the
transaction verification device.
 Type: Select COM (RS-232) or TCP/IP (LAN)
 Device IP: Input the IP address of the
transaction verification device when it is
connected through the network.
 Protocol: Communication protocol between
DVR and the transaction verification device.
1. Text-in: Receive ASCII character.
2. SDVR-POS: Manufacturer’s own
protocol.
 Contact your transaction verification dealer for information.
 Start character: Input the assigned character to start display and save. If there is
no input, the system will display and save all data without classification per
transaction.
 End character: Input the assigned character to terminate display and save. It
must have a start character to work correctly.
 Line break: Set the line change character. (It should be 16 digits HEX Value.)
1. CRLF, CR, LF: The character that is generally used in ASCII-type
transaction verification. (Please contact transaction verification
manufacturer for the detail.)
2. Custom: It can be used except the above general character. Only
number (0~9) and alphabet (A ~ F) can be used and even numbers
should be input. For example: Hexadecimal: 0x0D 0x0A → 0D0A
 Save: Save the transaction verification data.