User Manual

User Manual | 14
3. Operation
3.1 User Log-in
Input USER and PASSWORD after turning on the system. The factory default of USER and
PASSWORD are “admin” and no password.
NOTE
1) LOGIN window will be permanently displayed until a user logs in with the right
USER and password.
2) If DVR is set as AUTO LOGIN, login process is not necessary. See “4.1.2 User” for
more information.
NOTE
The key in the virtual keyboard includes common words, such as Admin, root,
http://, rtsp://, www., .com, .net, .org etc.
3.2 Live Display Mode
3.2.1. Channel Selection
Live image can be seen by easy button operation after power-up. The images can be seen in 1, 4,
6, 9, 10, 13 and 16 screen splits (some split options may not be available according to the DVR’s
number of channels). Whenever the up/down on IR remote controller is pressed, and whenever
the screen display mode button ( ) on the tool bar is clicked, the screen
will change to display the next channel or sequence of channels.
To switch from a multi-channel view to a single camera, click on the selected channel. To return
to previous screen mode, click of the left mouse button again.
“VIDEO LOSS” is shown on the display screen when no camera is connected or disconnects
suddenly. When a camera is disconnected, a warning sound shall be generated depending on
the system setting.
Admin users can set different level of authorization for each user, granting them specific access
to specific channels. If a certain user is not authorized to view a channel, no image is shown on
the display screen as below.