User Manual

Table Of Contents

User Manual | 6

1.4.3. IR Remote Controller (Optional Item)

• Power: system ON/OFF

• DVR ID selection

• Numeric button: channel selection or password

input

• PTZ button

• Preset button: select preset in PTZ mode

• Focus button: focus IN/OUT in PTZ mode

• ZOOM button: zoom IN/OUT in PTZ mode

• Preset tour: tour ON/OFF in PTZ mode

• Direction button

• Enter button

• Menu button

• Return button

• Playback buttons on search mode

• Emergency recording button

• Auto-sequence button in live mode

• Screen mode button

• Backup button

NOTE

User can control multiple DVRs with one IR remote controller.

In order to control multiple DVRs, each DVR must have a different remote ID.

(The default ID is set as “0”.)

To setup the ID # in IR remote controller:

1) Keep pressing ID selection button () for about 5 seconds.

2) Set the ID number by pressing numeric button on IR remote controller. ID

number is available from 000 up to 255.

3) You have to press numeric button as three-digit number format. For example,

press “000” for 0, “023” for 23, and “234” for 234.