User Manual

User Manual | 38
Live display settings:
 Display line: Set the number of lines to display on the screen.
 Clear time: Set the time period to display text on the screen. Data will be deleted
from the screen if no new data is entered after the set time. If it is set as “0”, the
data will not be deleted (If there is start character and the character is input,
current data will be deleted regardless of the clear time setting).
 Position: Designate the display position of transaction data.
 Font color: Select the font color which will be displayed on the screen. It will be
displayed with the color that is shown on SAMPLE TEXT.
 Show: Select to display transaction data in the live mode.
 Scroll reverse: Select to change the direction of scrolling. If it is selected, you can
scroll from the bottom to top, the latest data is displayed on the top.
 Playback display settings: Open setup screen for playback mode
 Display line: Set the number of lines to
display on the screen.
 Clear time: Set the time period to display text
on the screen. Data will be deleted from the
screen if no new data is entered after the set
time. If it is set as “0”, the data will not be
deleted (If there is Start Character and the
character is input, current data will be
deleted regardless of the Clear Time setting).
 Position: Designate the display position of
transaction data.
 Font color: Select the font color which will be
displayed on the screen. It will be displayed with the color that is shown on
“SAMPLE TEXT”
 Show: Select to display transaction data in the playback mode.
 Scroll reverse: Select to change the direction of scrolling. If it is selected, you can
scroll from the bottom to top, the latest data is displayed on the top.
 Port setup: Open setup screen for communication port
 Type: Setup the type of communication port.
o Serial: It is for 1-to-1 connection between
DVR and transaction verification device
without serial mux.
o Mux: It is for 1-to-Nulti connection
between DVR and transaction
verification device.
 Baud rate: Set baud rate according to the
transaction verification device.
 Parity: Set parity according to the transaction
verification device.
 Data bit: Set data bit according to the
connected transaction verification device.
 Stop bit: Set stop bit according to the connected transaction verification device.
 TCP/IP PORT: Set the TCP/IP port number.