User Manual

35 | VMAX A1 Plus™ DVR
f. Tour: Set the camera to move between preset positions
in order. The camera will keep running the tour until it
manually is disabled.
g. Auto-pan: Set the camera to move 360° in one
direction. The camera will keep running the auto-pan
until it manually is disabled.
h. Guard-tour: Set the camera to move between selected
presets in a set order and interval. The camera will keep
running the guard tour until it is manually disabled.
 Set: Set the time interval (in seconds) and select the preset position. Add to
sequence by clicking button. The preset will appear in the sequence
column indicating the preset number and the set interval time.
 Delete: To delete a preset position form the sequence, select the preset in
the Sequence column and click button.
 Move: Start the guard-tour.
i. Home: Set the camera to move to an original position memorized by the
camera. In case the PTZ is directly connected to the rear panel of DVR, user can
control additional settings such as power, light, wiper and pump, etc. through
AUX control button ( ).
4.2.4. PTZ (UTC Connection)
The DVR supports connection and control of cameras up the coax (UTC). This means you can
control a camera’s OSD settings and movement (on PTZ cameras) with no need for additional
cables.
 Protocol: If the PTZ camera is connected via UTC, select the UTC-protocol of the
connected PTZ camera. Please check the camera protocol type before connection.
 HD-A(C) TYPE: Some of HDA camera which not detected on the HD-A / HD-TVI, apply
this protocol
 HD-A/HD-TVI TYPE: In case of menu-enter is worked preset 95 or IRIS, the connection is
auto detected
 HD-TVI(C): Some of TVI camera which non-detected on the HD-A / HD-TVI, apply this
protocol
 Control (The functions depends on the camera’s model and supported features): When
the
PROGRAM button is clicked, the control menu of the camera will appear on the
monitor. Show the camera’s OSD menu on the screen and setup camera’s configuration