User Manual
Table Of Contents
- Working with DW Spectrum
- Opening and Closing DW Spectrum Client
- Connecting to DW Spectrum via Web-Client
- Launching DW Spectrum in Compatibility Mode
- Connecting to Enterprise Controller and Working Offline
- Introducing User Roles
- DW Spectrum User Interface Overview
- DW Spectrum Quick Start
- Obtaining and Activating DW Spectrum Licenses
- Obtaining and Configuring Media Server’s Additional Settings (Admin Only)
- Cameras and Encoders Management
- Viewing Full Camera List
- Adding Cameras and Encoders
- Setting Up Cameras
- Setting up Analog Cameras
- Renaming Cameras
- Obtaining Camera’s IP, MAC, Firmware and Model
- Configuring Audio on Camera
- Configuring Camera's Authentication
- Setting up PTZ
- Setting Up Fish-Eye Cameras
- Setting up Recording Schedule
- Setting up Motion Mask and Motion Sensitivity
- Configuring Proprietary Camera Parameters
- Adjusting Secondary Stream Quality
- Setting Same Parameters for Multiple Cameras
- Swapping Cameras between Media Servers (Admin Only)
- Diagnosing Offline Cameras
- Deleting Cameras (Admin Only)
- Configuring Events and Actions (Admin Only)
- Tracked Events
- Setting up Schedule for Tracking Events
- Motion on Camera
- Camera Disconnection/Malfunction
- Storage Failure
- Network Issue
- Camera IP Conflict
- Input Signal on Camera
- Media Server Failure
- Media Servers Conflict
- EC Connection Lost
- Licenses are not Configured
- E-mail is not Set for Users
- E-Mail Server is not Configured
- Error while Sending E-Mail
- Storages are not Configured
- Actions that DW Spectrum Can Do
- Default Rules
- Viewing Events Log
- Tracked Events
- User Management
- Layout Management
- Creating New Layout
- Setting up Layouts
- Assigning Layouts to Users (Admin Only)
- Deleting Layouts (Admin Only)
- Opening and Closing Saved Layouts
- Backing up and Restoring DW Spectrum Database
- Playback in DW Spectrum
- Screen Recording (Windows Only)
- Upgrading DW Spectrum
- Troubleshooting and Contacting Support
- Glossary
88
DW Spectrum User Manual
Digital Watchdog
Mail Notifications
DW Spectrum can send E-mails to Users or to additional addresses when Events occur.
IMPORTANT. E-Mails cannot be sent if E-Mail Server is not configured. In this case, E-Mail Server is
not Configured notification is shown up. See "Configuring Mail Server for E-Mail Notifications" for more
details.
Basic Parameters
Users the E-Mails should be sent to:
To filter search, use the Filter box. Filter criteria is the same as search (see "Search"). It is possible to
Drag'n'Drop selected Users from Resource Tree onto Action's advanced settings form.
IMPORTANT. E-Mails will be sent to Users' E-Mail addresses. If E-Mail address is not configured for
User, then the user cannot receive E-Mails (see above). E-mail is not Set for Users notification is
generated in this case. See "Changing User Settings" for information on how to set up E-Mail for User.
Note: To send E-Mails to additional addresses, see advanced parameters.
Advanced Parameters
Additional Recipients – additional E-Mail addresses to send notifications to. Several recipients must be
separated by the ";" symbol.
Aggregation.