User Manual

70
DW Spectrum User Manual
Digital Watchdog
3. Once added, Rule should be configured.
Select Event on the left-hand side that needs to be monitored. See "Tracked Events" for more
information
Select Action on the right-hand side that needs to be performed once Event occurs. Refer to
"Actions" for details
Specify basic parameters for Event and Action. Click on Source or Target column in the Rule row and
choose the desired value.
IMPORTANT. If some fields are missing or incorrect, Rule is considered invalid. In this case, it will
turn red:
Set Aggregation period. Once set, all Actions will be executed once per the specified period. If
not, Actions will be executed every time Events occur. Applies to Notifications, Mail Notifications,
Play Sound, Say Text.
If any additional configuration is needed, click Advanced... The advanced settings will be displayed
on the bottom. Those settings differ from each other depending on Events/Actions that are being
configured. See this chapter for more information on a specific Event/Action.
Add Comments for Rule if needed.
4. Set or clear the flag (on the left-hand side of each Rule) to enable or disable it.
5. As soon as all configurations are done, click Apply to accept changes or Cancel to discard. Click OK to
apply changes and close the form.
IMPORTANT. If any Rule is considered invalid, the warning displayed below will appear. If apply the
changes, incorrect Rules will be disabled.