User Manual
Table Of Contents
- Working with DW Spectrum
- Opening and Closing DW Spectrum Client
- Connecting to DW Spectrum via Web-Client
- Launching DW Spectrum in Compatibility Mode
- Connecting to Enterprise Controller and Working Offline
- Introducing User Roles
- DW Spectrum User Interface Overview
- DW Spectrum Quick Start
- Obtaining and Activating DW Spectrum Licenses
- Obtaining and Configuring Media Server’s Additional Settings (Admin Only)
- Cameras and Encoders Management
- Viewing Full Camera List
- Adding Cameras and Encoders
- Setting Up Cameras
- Setting up Analog Cameras
- Renaming Cameras
- Obtaining Camera’s IP, MAC, Firmware and Model
- Configuring Audio on Camera
- Configuring Camera's Authentication
- Setting up PTZ
- Setting Up Fish-Eye Cameras
- Setting up Recording Schedule
- Setting up Motion Mask and Motion Sensitivity
- Configuring Proprietary Camera Parameters
- Adjusting Secondary Stream Quality
- Setting Same Parameters for Multiple Cameras
- Swapping Cameras between Media Servers (Admin Only)
- Diagnosing Offline Cameras
- Deleting Cameras (Admin Only)
- Configuring Events and Actions (Admin Only)
- Tracked Events
- Setting up Schedule for Tracking Events
- Motion on Camera
- Camera Disconnection/Malfunction
- Storage Failure
- Network Issue
- Camera IP Conflict
- Input Signal on Camera
- Media Server Failure
- Media Servers Conflict
- EC Connection Lost
- Licenses are not Configured
- E-mail is not Set for Users
- E-Mail Server is not Configured
- Error while Sending E-Mail
- Storages are not Configured
- Actions that DW Spectrum Can Do
- Default Rules
- Viewing Events Log
- Tracked Events
- User Management
- Layout Management
- Creating New Layout
- Setting up Layouts
- Assigning Layouts to Users (Admin Only)
- Deleting Layouts (Admin Only)
- Opening and Closing Saved Layouts
- Backing up and Restoring DW Spectrum Database
- Playback in DW Spectrum
- Screen Recording (Windows Only)
- Upgrading DW Spectrum
- Troubleshooting and Contacting Support
- Glossary
50
DW Spectrum User Manual
Digital Watchdog
Dual Stream Recording Specifics (RADASS)
Some Recording Parameters may need Motion to be supported by the Camera. Motion + Low Quality
Always recording requires Dual-Streaming to be supported by Camera.
If Dual-Streaming is supported, the second stream settings are set automatically based on the main
recording settings:
2 to 7 FPS
320p to 480p
Not only is the second stream used for recording, it is also used for Software Motion Detection and
bandwidth and CPU saving during playback. See "Setting up Motion Mask and Motion Sensitivity" and
"CPU and Bandwidth Saving during Playback (RADASS)".
Modifying Recording Schedule
DW Spectrum provides a powerful and flexible schedule for configuring recording parameters.
A specific date and time can be set in the recording schedule as well.
Examples:
Workdays 8AM-8PM – record Always, 24 FPS, high quality
Weekends and Workdays 8PM-8AM – record motion only, 10 fps, low quality
The cameras recorded by Media Servers are marked with a small red circle in Resource Tree:
– camera in recording mode
– camera recording is setup, though not recording at the moment (a license is still being used)
Note: It is possible to configure Cameras for Administrators and Viewers that have appropriate
permissions.