User Manual
Table Of Contents
- Working with DW Spectrum
- Opening and Closing DW Spectrum Client
- Connecting to DW Spectrum via Web-Client
- Launching DW Spectrum in Compatibility Mode
- Connecting to Enterprise Controller and Working Offline
- Introducing User Roles
- DW Spectrum User Interface Overview
- DW Spectrum Quick Start
- Obtaining and Activating DW Spectrum Licenses
- Obtaining and Configuring Media Server’s Additional Settings (Admin Only)
- Cameras and Encoders Management
- Viewing Full Camera List
- Adding Cameras and Encoders
- Setting Up Cameras
- Setting up Analog Cameras
- Renaming Cameras
- Obtaining Camera’s IP, MAC, Firmware and Model
- Configuring Audio on Camera
- Configuring Camera's Authentication
- Setting up PTZ
- Setting Up Fish-Eye Cameras
- Setting up Recording Schedule
- Setting up Motion Mask and Motion Sensitivity
- Configuring Proprietary Camera Parameters
- Adjusting Secondary Stream Quality
- Setting Same Parameters for Multiple Cameras
- Swapping Cameras between Media Servers (Admin Only)
- Diagnosing Offline Cameras
- Deleting Cameras (Admin Only)
- Configuring Events and Actions (Admin Only)
- Tracked Events
- Setting up Schedule for Tracking Events
- Motion on Camera
- Camera Disconnection/Malfunction
- Storage Failure
- Network Issue
- Camera IP Conflict
- Input Signal on Camera
- Media Server Failure
- Media Servers Conflict
- EC Connection Lost
- Licenses are not Configured
- E-mail is not Set for Users
- E-Mail Server is not Configured
- Error while Sending E-Mail
- Storages are not Configured
- Actions that DW Spectrum Can Do
- Default Rules
- Viewing Events Log
- Tracked Events
- User Management
- Layout Management
- Creating New Layout
- Setting up Layouts
- Assigning Layouts to Users (Admin Only)
- Deleting Layouts (Admin Only)
- Opening and Closing Saved Layouts
- Backing up and Restoring DW Spectrum Database
- Playback in DW Spectrum
- Screen Recording (Windows Only)
- Upgrading DW Spectrum
- Troubleshooting and Contacting Support
- Glossary
84
DW Spectrum User Manual
Digital Watchdog
It is possible to perform the following:
Obtain additional information by hovering over the notification with a mouse cursor. The information
will appear on the left:
Motion Detection and Input Signals – the frame from Camera the Event occurred at and additional
information. Click on the notification or additional information to open Camera to view its archive
for event specifics.
Network Issue on Camera – the last frame received from Camera and additional information. Click
on the notification or additional information to open Camera Settings.
Issues related to System Messages – additional information. Click on the notification to go to the
appropriate dialog.
When clicking on notification or detailed information, the corresponding action will be performed:
Motion or Input on Camera – Camera will be opened in a new Tab.
Camera IP Conflict – Camera's Web Page will be opened in a browser
Camera Network Issue – Camera's Settings form will be opened
Media Server Failure or Storage Issue – Server Settings form will be opened
E-Mail Issue – E-Mail Server Settings form will be opened
License Issue – License Form will be opened
Connection is Lost – connection dialog will be opened
Media Server Conflict – no action
Close the notification. Either Right Click or hover over with a mouse cursor to obtain additional
information and click on the cross sign in the top right corner. Green and yellow notifications will
eventually disappear.
View Event Log. Click on .
Go to Event Settings. Click on .