User Manual
Table Of Contents
- Working with DW Spectrum
- Opening and Closing DW Spectrum Client
- Connecting to DW Spectrum via Web-Client
- Launching DW Spectrum in Compatibility Mode
- Connecting to Enterprise Controller and Working Offline
- Introducing User Roles
- DW Spectrum User Interface Overview
- DW Spectrum Quick Start
- Obtaining and Activating DW Spectrum Licenses
- Obtaining and Configuring Media Server’s Additional Settings (Admin Only)
- Cameras and Encoders Management
- Viewing Full Camera List
- Adding Cameras and Encoders
- Setting Up Cameras
- Setting up Analog Cameras
- Renaming Cameras
- Obtaining Camera’s IP, MAC, Firmware and Model
- Configuring Audio on Camera
- Configuring Camera's Authentication
- Setting up PTZ
- Setting Up Fish-Eye Cameras
- Setting up Recording Schedule
- Setting up Motion Mask and Motion Sensitivity
- Configuring Proprietary Camera Parameters
- Adjusting Secondary Stream Quality
- Setting Same Parameters for Multiple Cameras
- Swapping Cameras between Media Servers (Admin Only)
- Diagnosing Offline Cameras
- Deleting Cameras (Admin Only)
- Configuring Events and Actions (Admin Only)
- Tracked Events
- Setting up Schedule for Tracking Events
- Motion on Camera
- Camera Disconnection/Malfunction
- Storage Failure
- Network Issue
- Camera IP Conflict
- Input Signal on Camera
- Media Server Failure
- Media Servers Conflict
- EC Connection Lost
- Licenses are not Configured
- E-mail is not Set for Users
- E-Mail Server is not Configured
- Error while Sending E-Mail
- Storages are not Configured
- Actions that DW Spectrum Can Do
- Default Rules
- Viewing Events Log
- Tracked Events
- User Management
- Layout Management
- Creating New Layout
- Setting up Layouts
- Assigning Layouts to Users (Admin Only)
- Deleting Layouts (Admin Only)
- Opening and Closing Saved Layouts
- Backing up and Restoring DW Spectrum Database
- Playback in DW Spectrum
- Screen Recording (Windows Only)
- Upgrading DW Spectrum
- Troubleshooting and Contacting Support
- Glossary
132
DW Spectrum User Manual
Digital Watchdog
Navigating through Several Cameras Synchronously
DW Spectrum provides a powerful engine that enables users to navigate through multiple cameras: if
several Cameras are displaying at the same time, they can be synchronized.
If User performs search, fast forward, rewind or search by frame – each
camera will be synchronized.
However, recording may be set up differently. If no recording took place
over a certain period of time, NO DATA will appear on the camera view.
Recorded fragments are displayed on the Time Line in two rows:
The upper row displays fragments for Camera selected on Scene
The lower row – for all Cameras displayed on Scene
It is possible to disable Synchronization (press button). If no Item is selected, the selection will
move to the previously selected item, which will become the only item affected by playback controls
(seek, speed etc).
Thus, if Synchronization is disabled, it is possible to seek each Camera in a different position. In this case
Time Line displays positions for all Cameras played back (see blue markers on the picture):
If User selects Camera on Scene and enables Synchronization again, all other cameras will get
synchronized with the selected Camera (Position and Speed will be synchronized).