User Manual

DW Spectrum 3.0
Rev. 072017 Page | 56
Setting Up PTZ Tours
DW Spectrum allows to create PTZ Tours. PTZ Tour is a sequence of PTZ Positions. It may be useful to move from one
position to another automatically in a cycle to observe large locations by a single Camera.
The following parameters can be configured for PTZ Tours:
 Positions. Tour can contain an unlimited number of PTZ Positions.
 Stay Time - the duration of time for Camera to stay on PTZ Positions.
 Speed - the speed of Camera moving between PTZ Positions.
To configure PTZ Tours:
1. Open Context Menu and select PTZ... -> Manage. The following window will appear:
2. Move the form aside, so that the item and its PTZ controls are fully accessible.
3. Make sure the list of positions contains a minimum of two positions.
4. Click Create Tour. A new item will appear in the bottom section: