User manual

Nexus Manual 022012 | 29
2.3.1 CREATING A MOTION AREA
1. From the Display Screen, click Setup.
2. Click Motion.
3. Choose a camera from the Select Camera list.
4. Select the Detect Detail Motion Area checkbox.
5. Click Clear.
6. Click Advanced Motion Area Setup.
7. Click a Motion Detection Area shape button.
8. Drag the mouse over the camera image.
Note: To create a polygon shape, click the mouse at
each point and double-click to close the shape.
9. Select OK.
10. Move the sliders to adjust motion sensitivity and the
noise filter.
11. Define the pre-alarm and post-alarm recording time for a
motion event.
Pre Alarm: 0~50 Seconds (number of seconds the NVR records before motion is detected). Post Alarm: 0~50 Seconds (number of seconds the
NVR records after motion is detected).