User guide

80
7K, 9K series
8.9 REMOVING THE DISC FROM THE CD-RW DRIVE
1 Press the Open button on the CD-RW drive. The Eject CD Window should appear on the screen.
2 Select the Leave As Is option to continue using the CD for future backups by the DVR unit. You may not be
able to read the disk in other CD-ROM drives if this is selected.
Select the Close To UDF v 1.5 to view the data in standard CD-ROM Drives.
The host computer that will be viewing the data must have Roxio UDF Reader installed to view the data.
When this option is selected, a copy of the UDF reader is automatically placed onto the CD so that if the
host computer does not have the UDF reader installed, it can be installed from the same CD that has the
data.
Do not select CLOSE TO READ ON ANY COMPUTER. This option does not allow the CD to be playable
on most PC’s and may require a new CD to be made.
3 Click OK to eject the CD. Select Cancel to exit the Eject CD dialog box without ejecting the CD.
4 Once the CD-RW drive door opens, remove the CD and place it in a protective sleeve or case.