User guide

7K, 9K series

7.7.2 USING THE ONSCREEN COMPASS

1 Press the PTZ Button on the main screen.

2 Control the PTZ by dragging the mouse on

the screen in the desired direction. A green

line will appear to show the direction the PTZ

will move. The shorter the line the less the

PTZ will move. The longer the line the more

the PTZ will travel in the specified direction.

7.8 UNDERSTANDING TOURS

1 Travel Speed This option defines the speed at which a PTZ moves from one Preset position

to the next (when using Preset Tour 2).

2 Dwell This option defines the length of time (in seconds) that a PTZ Tour stays on a

Preset Position. Moves from one Preset position to the next (when using

Preset Tour 2).

3 Setting – Start Pos / End

Pos

These options describe how to define a Mimic Tour. The Start Position button

begins the ‘recording’ process. The Stop Position button ends it.

4 Pan Swing / Tilt Swing This option enables the Horizontal (Pan) or Vertical (Tilt) ‘Guard Tours’.

5 Run / Stop Runs the selected Pan or Tilt Tour.