User guide

7K, 9K series

6.11 INDEX SEARCH

Using the Index Search can greatly decrease the amount of time spent searching through saved video. The Index

Search allows a user to perform a search based on criterion such as Sensor, Motion and Instant Record events

1 Select All

Cameras

This option selects all cameras.

2 Multiple camera

Select one or more cameras to search.

3 Select Time The default search time is 24 Hours. If this

option is selected, a Start Time and End

Time must be entered.

4 Start Time Specifies the Start Time for the Index

Search.

5 End Time Specifies the End Time for the Index

search.

6 Sort Option

Searches by the selected event: Sensor,

Motion Detection or Instant Record.

7 All Event

Searches on all events (sensor, motion,

instant recording) for the selected

camera(s).

6.12 PERFORMING AN INDEX SEARCH

1 Select the Index Search button. The Index Search Option box will open.

2 Select a single camera or check the All Cameras option.

3 Select an event to search (sensor, motion, instant record) or select the All Event option.

4 Click OK. There may be a delay while results are returned.

Results will be displayed in a column on the left side of the screen.

If no results are found, “NO IMAGE FOUND” will appear in the column.

5 Once the results are displayed, double-click on any one to search through them.

6 Once the desired image is found, apply it to the Main Search by selecting the Close button at the bottom of

the results column.