User guide

42
7K, 9K series
5.13 SENSOR AND OUTPUT
The Sensor and Output Window allows you to enable, disable and configure Sensors and Control Outputs as well
as adjust Emergency Agent options.
1 Use Enables/Disables the Sensor for use.
2 Type Selects whether the Sensor will be Normally Open (NO) or Normally Closed
(NC).
3 Record Specifies the time period (in seconds) to record once the Sensor is tripped.
4 Delay(s) Adjusts the amount of time (in seconds) to ignore the sensor if it is
continuously activated.
5 Output Selects the Control Output to activate once the Sensor has been tripped. You
can select multiple Control Outputs by placing a comma between numbers.
6 Duration Adjusts the amount of time (in seconds) that the Control Output will remain
activated.
7 Use by Time This option Enables/Disables the Use by Time feature. When activated the
Use by Time feature allows you to specify a time period that the Control
output will be operational. For example you could disable the control output
during work hours so that alarms will not go off when a door is opened and a
sensor is tripped.
8 Name This option allows you to assign a meaningful name to the Control Output.
(ex. Warehouse Siren)
9 Auto ON The time at which the Control Output will be available for use.
10 Auto Off The time at which the Control Output will be disabled and not available for
use.