User guide

7K, 9K series

5.12 RECORDING SCHEDULE

The Channel Setup option allows you to turn cameras on/off as well as rename them to an identifiable name or

number.

1 Video Format Displays the Video Format (NTSC/PAL).

2 Sensitivity The Sensitivity adjusts the rate at which the Keyframe refreshes. This option

directly affects the codec being used to record the video. Adjusting this setting

can have drastic negative effects on the quality of the video. It is highly

recommended that this setting always be left at the default setting unless so

instructed by a system administrator.

3 Frame Status Displays the layout and order of the frames being recorded. The Frame

Status represents a One Second period of time with 240 colored blocks

inside. Each block represents one frame and each color represents a camera.

(See Camera Number) The layout shows the recording order for each

second.

4 Camera Number The cameras are given different colors to help distinguish themselves when

viewing the Frame Status. You can adjust the recorded Frames per Second

by sliding the bar to the left and right.

5 Set Default Selecting this option resets all camera Frames and resolutions to the default

settings.

6 Resolution Displays the available Resolution options.

7 Quality This setting affects the quality of the video. Increasing the quality of the

camera can reduce the amount of pixilation within the image considerably, but

also increases the file size.