User guide

35
7K, 9K series
5.6.1 HOW TO USE INTENSIVE RECORDING
The Intensive Recording option is setup as an ‘All or Nothing’. This means that once enabled (associated with
sensors), all cameras that are associated with sensors will activate the Intensive Recording.
To activate the Intensive Recording option, follow these steps.
1 Inside Setup, select the camera you wish to use and then enable the appropriate sensor you wish to
associate to it.
2 Open the Intensive Recording Options. Enable the Intensive-On-Sensor option and then select the desired
Pictures Per Second for both the Intensive and Non-Intensive Channels. You can also adjust the Resolution
and the holding duration for the Intensive Channel.
3 Close the Intensive Recording window by selecting the APPLY button.
4 Open the Sensors and Outputs window.
5 Enable the sensor you associated with the Intensive Recording by placing a check in the box next to it.
6 Press the APPLY button and exit out of setup