User guide

34
7K, 9K series
5.5 SENSOR CONNECTION
You can connect one or more Sensors to the selected camera by
checking the box next to the sensor(s). Connecting a sensor to
the camera allows you to activate both Standard Recording and
Intensive Recording.
5.6 INTENSIVE RECORDING OVERVIEW
The Intensive Recording Option allows you to increase the Pictures Per Second and the resolution of any camera
recording using sensor activation. When the intensive recording is activated, the resolution of the remaining
cameras is immediately reduced to 360x240 and the Pictures per second to a user specified level. This is done to
guarantee that the Pictures Per Second and Resolution will be set correctly and not exceed the DVR limitation.
1 Intensive Channel Adjusts the Frame Rate for the Intensive Channel.
2 Non-Intensive Channel Adjusts the Frame Rates for the Non-intensive Channels (the channels will
drop their current settings and be forced to use this setting).
3 Holding Duration Adjusts the amount of time to hold the Intensive Recording active.
4 Intensive Channel
Resolution
Adjusts the Resolution for the Intensive Channel.
5 Non-Intensive Channel
Resolution
The DVR automatically adjusts the Non-Intensive Channels down to the
system default. This setting cannot be changed.
6 Intensive On-Sensor This setting enables the association of Intensive Recording to sensors.
Figure 4.8