User guide

33
7K, 9K series
5.4.1 CREATE A MOTION AREA
1 Place the mouse pointer at the upper left hand
corner of the area you want to designate, press
and hold down the left mouse button, drag the
mouse. Let go of the button when the Motion
Area is the size you want it to be.
2 Continue creating as many Motion Areas as you
wish. You can resize them and move them by
dragging the sides and corners of the Motion
Area.
5.4.2 CLEAR MOTION AREA
To remove the motion areas of a camera, click
5.4.3 MOTION ALARM OUTPUT
The MOTION & CONTROL menu allows record times, delays in resuming motion sensing, and outputs to be
defined per camera.
1 Record Sets duration of time recorded
when motion is sensed.
2 Delay
Sets delay in resuming motion
detection after previous
activation.
3 Output Sets Control Output associated
with camera.
4 Duration
Sets duration of signal sent
over selected Control Output.