User guide

32
7K, 9K series
5.3 CAMERA INFORMATION
1 Name Allows you to specify a name for each camera
2 Bright Adjusts the Brightness of the selected camera.
3 Hue Adjusts the Hue of the selected camera.
4 Contrast Adjusts the Contrast of the selected camera.
5 Adjust Default Adjust the color settings for the selected camera back to the System default.
6 Adjust All Default Adjusts the color settings for ALL cameras to the System default.
5.4 MOTION SETTING
The DVR unit allows you to adjust several different Motion Settings.
1 Beep on Detect When motion is detected an alarm is sounded.
2 Full Screen Pop-Up When Motion is detected, the camera is brought up in full screen mode.
3 Alarm Output Enables the Alarm Output. The Alarm Output is always defaulted to Control Output
#16. Control Output #16 is System designated default for an external alarm.
4 Sensitivity Adjusts the sensitivity within the designated Motion Area.
5 Clear Motion Area Clears all Motion Areas for the selected camera.
6 Motion Alarm
Output
Opens the MOTION & CONTROL window which allows setting of record and delay
times as well as setting outputs on motion activation.