User guide

31
7K, 9K series
1 Camera Information Allows you to adjust the name and color settings for each camera.
2 Motion Settings Displays options for editing each camera’s Motion Detection settings.
3 Sensor Connections Allows you to attach one or more sensor connections to each camera.
4 Pre-Alarm Allows you to record a section of video just prior to Motion or Sensor
activation.
5 All Camera Settings Selecting this option copies the settings for the selected camera to all the
cameras.
6 Onscreen Keyboard Clicking this button brings up an onscreen keyboard.
7 Intensive Recording Opens the Intensive Recording window which allows you to specify the
Pictures per Second to be recorded.
8 Communication Setup Opens the Communication Setup window which contains options and settings
for allowing remote access, Internet Broadcasting and more.
9 Audio Opens the Audio ENABLE/DISABLE options.
10 Voice Warning Allows you to use an audible warning (.wav Sound Clip) for when Motion or
Sensors are activated.
11 Motion Index Interval Specifies the amount of time to record once Motion has been activated
12 Auto Sequencing
Time(s)
When the Loop button is activated, the Auto Switching Time specifies the
amount of time that elapses before switching to the next Screen Division
group.
13 Camera Settings Selects the current camera to be edited.
14 Setup Options Allows you to toggle between the 3 setup screens.
15 Pan/Tilt Setup These options setup a PTZ camera to the DVR unit and allow you to create
Presets and Tours. (Refer to PTZ Chapter in this manual)
16 Volume Opens the Volume Control menu for the DVR unit.
17 System Schedule Opens the System Schedule window which allows you to specify the time and
dates to record and the type of recording which is to be done (Motion,
Continuous, etc).
18 Recording Schedule Opens the Recoding Schedule window which allows you to adjust the Pictures
per Second for each camera.