User guide

26
7K, 9K series
4.9 SCREEN DIVISION MENU
The Screen Division menu allows you to view cameras in groups such as two by two, three by three and four by
four. The button options are shown below.
1st Four Cameras View – Displays cameras 1-4 in the Video Display Area. To return to a different
Multi-Camera View, select a different Screen Division option from the Screen Division menu.
2nd Four Cameras View – Displays cameras 5-8 in the Video Display Area. To return to a different
Multi-Camera View, select a different Screen Division option from the Screen Division menu.
3rd Four Cameras View – Displays cameras 9-12 in the Video Display Area. To return to a different
Multi-Camera View, select a different Screen Division option from the Screen Division menu.
4th Four Cameras View – Displays cameras 13-16 in the Video Display Area. To return to a different
Multi-Camera View, select a different Screen Division option from the Screen Division menu.
1st Nine Cameras View – Displays cameras 1-9 in the Video Display Area. To return to a different
Multi-Camera View, select a different Screen Division option from the Screen Division menu.
2nd Nine Camera View – Displays cameras 8-16 in the Video Display Area. To return to a different
Multi-Camera View, select a different Screen Division option from the Screen Division menu.
Multi-Camera View – Displays a group of cameras within the Video Display Area.
All Camera View – Displays all 16 cameras within the Video Display Area.
Multi-Camera View – Displays a group of cameras within the Video Display Area.
Multi-Camera View – Displays a group of cameras within the Video Display Area.
Full Screen
– The Full Screen Option allows you to view the Video Display Area using the entire
viewable area on the monitor. When this is selected, no menu options are visible. You can activate
the Full Screen Option by clicking on the Full Screen Button within the Screen Division Menu. You can
deactivate Full Screen mode by right clicking on the screen.
Auto Sequence
– Sequences through the Screen Divisions sets. For example, selecting the 1A and
then the Loop button will sequence through 1A,2A,3A,4A and then repeat. This option is not available
for the 7,10 and 13 screen divisions.