User guide

23
7K, 9K series
4.6 DISPLAY SCREEN
Each time the DVR is restarted, the program defaults to the Display screen. The following diagram outlines the
buttons and features used on the Display screen. You should become familiar with these options as this is the
screen that will be displayed the majority of the time.
1 Date/Time Displays current date and time. This date and time is stamped onto the
recorded video and is displayed whenever the video is played back.
2 Search Displays search features that allow for searching through previously
recorded video.
3 Setup Displays Setup menu, from which all customizable settings can be edited.
4 Screen Division Buttons Allows the view of one or more sets of cameras at a time. They are
organized in several different groups such as 1x1, 4x4, and 8x8.
5 Loop Toggles looping cameras options on or off.
6 Backup Displays the Backup option.
7 PTZ Opens Pan/Tilt options for controlling PTZ-enabled cameras.
8 Exit Displays several options, including Logout, Shut Down, Restart, and
Restart in Windows Mode.
9 Storage Capacity The Storage Capacity Usage Indicator displays the total free storage space
available to the DVR unit. When the Storage Capacity reaches 100%, the
DVR unit begins to rewrite over the older, saved video.
10 Alarm Status Bar Displays Alarm Status for each Sensor Inputs.
11 Relay The Digital Output Relay button fires the Output Relay. The output relays
can be hooked up to external alarms, set to trigger a phone call, etc.
12 Current User Displays the name of the user currently logged onto the DVR.
13 Remote Client Status Displays users connected remotely to the DVR unit.