User guide

13
7K, 9K series
3.5 MONITOR SETUP
There are up to 3 available connections for monitors which can be used individually or in tandem.
SVGA Output To VGA Monitor.
S-Video Output
To TV/VCR.
Attach the Monitor or Monitors to the Rear of the DVR unit using the cable supplied by the Monitor Manufacturer.
Refer to your monitor manual for detailed information on how to setup and use it.
NOTE: The monitor you use must be capable of having a screen resolution of 1024 x 768 and display colors of at
least 32 Bit
3.6 POWER SETUP
Attach the AC power cable to the rear of the DVR Unit. See Rear Panel Connectors for more information.
WARNING:
To reduce the risk of electrical shock or damage to the equipment:
Do not disable the power grounding plug.
The grounding plug is an important safety feature.
If the electrical plug you are using does not have a ground plug receptacle contact a licensed
electrician to have it replaced with a grounded electrical outlet.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect the power from the computer by unplugging the power cord either from the electrical
outlet or the computer.