User guide

111
7K, 9K series
15.1 OPTIONAL 4 CH SPOT MONITOR OVERVIEW
This optional feature allows programmable usage of multiple 4 spot monitors. If cameras are assigned without
selection senor or motion as a trigger, any one camera may be assigned to an individual spot monitor on a
continuous basis. Or several cameras may be assigned to any individual spot monitor. When more than one
camera is assigned to a spot monitor the selected camera views will sequence at the selected hold-and-switch
rates.
Sensor activation or motion detection may also be selected to switch a camera to any of the 4 spot monitors when
sensor or motion is selected.
15.1.1 CREATE A NEW REMOTE CONNECTION
1 Check the “TV out Setting” box.
2 Click the “TV out ch:” drop down arrow and select the number of channels of your DVR.
*DVRs with less than 16 channels will use the 16-channel setting.
3 Click the “Set” button once you have selected the number of channels.
4 Click “OK” in the Vformat window after you’ve done steps 1-3
NOTE: Click the OK button on all POP UP screens while using vFormat