User guide

105
7K, 9K series
13.2.2 CREATE A NEW REMOTE CONNECTION
1 New Creates a new site to connect to.
2 Delete Deletes the selected site once it is selected from the list.
3 Delete All Deletes all listed sites.
4 Edit Used to edit a site once it is selected from the list.
5 Password Enter the logon password.
6 Connect Connects the Digital Watchdog Remote Client to the Server.
7 User Enter the Login Username.
8 Site Displays a list of pre-configured sites.
1 Select Start  Programs  DVR  Center  DVR Center.
The Digital Watchdog Center Software opens and a Site Connection List window opens.
2 Press New to open the Site Detail Information window.
3 Enter the Site Code and Site Name. The Site Code will be the name displayed inside the connection box
to help you identify the unit.
4
Enter the IP Address
of the DVR server.
By default the DVR unit is set to connect using DHCP.
5 Enter the Center Port. This setting is specified on the server.
6 Press OK.
7 Click on the newly created connection and enter the login username and password.
8 Press Connect.
1
2
3
4
5
6
7
8