User guide

7K, 9K series

12.4 CONFIGURING THE CLIENT PC

All configuration takes place in the Emergency Agent Window on the Client PC for descriptions and locations of the

buttons and features of the Emergency Agent window Refer to the Emergency Agent Window section later in this

chapter.

1 Open the Emergency Agent window on the Client PC.

Start >Programs > Digital Watchdog > Emergency Agent > Emergency Agent

2 Click New in the DVR List and enter the site

code, site name, and IP Address of the DVR

you wish to connect to in the Site Edit window

that opens. Click Save

3 Click the Tools menu and select Setup.

Confirm that the Listen Port

in the

configuration Window is set to the same

number as the Emergency Port in

Communication Settings on the DVR. If the

numbers are different adjust the Listen Port on

the client PC to match the DVR.

5 Click Enter

6 Reboot the Clint PC