Quick Start Guide

Single wall–mount bracket for LED illuminators

DW-ILWM1

Attention: This document is intended to serve as a quick reference for initial setup.

It is recommended that the user read the entire instruction manual for complete and proper installation and usage.

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

NOTE: Download all your support materials and tools in one place.

1. Go to: http://www.digital-watchdog.com/resources.

2. Search for your product by entering the part number in the ‘Search by Product’ search bar. Results

for applicable part numbers will populate automatically based on the part number you enter.

3. Click ‘Search’. All supported materials, including manuals and quick start guide (QSGs) will

appear in the results.

Quick Start Guide

WHAT’S IN THE BOX

1x single mount bracket

2x M6 serrated ﬂanged nut

2x M6 x 0.47” (12mm) bolt

1x quick setup guide

PAGE 1
Quick Start Guide Single wall–mount bracket for LED illuminators DW-ILWM1 WHAT’S IN THE BOX 1x single mount bracket 2x M6 serrated flanged nut 2x M6 x 0.47” (12mm) bolt 1x quick setup guide NOTE: Download all your support materials and tools in one place. 1. Go to: http://www.digital-watchdog.com/resources. 2. Search for your product by entering the part number in the ‘Search by Product’ search bar. R esults for applicable part numbers will populate automatically based on the part number you enter.
PAGE 2
a suitable material capable of supporang the ﬁnal mount a ALLING INSTALLING THE MOUNTING THE MOUNTING ACCESSORY ACCESSORY of mounang or hardware used depending on the wall mate Quick Start Guide e wall A]ach mount the wall bracket mount to the bracket structure to theusing structure suitable using tapping suitable screws tapping (PLASTIC screws ANCHOR, (PLASTICPTS1 ANCHOR, M6x40L) PT d inillustrated the ﬁgure. in The the ﬁgure.