User Manual

APPENDIX - TYPICAL INSTALLATIONS
TYPICAL INSTALLATIONS
The example below illustrates a typical set up for the NightWatch™ illuminators:
PoE+ IEEE802.3at
Router / Switch / Injector
RJ45 Cat5
Network Cables
PC
NightWatch™
illuminator
The example below illustrates a typical set up for the NightWatch™ illuminators, SiteWatch™
motion detectors and an IP camera:
PoE+ IEEE802.3at
Router / Switch / Injector
RJ45 Cat5
Network Cables
NightWatch™
illuminator
SiteWatch™ mo-
tion detector
IP Camera
TROUBLESHOOTING
If you are experiencing diculty connecting to your NightWatch™ illuminator through your
browser, try typing in the first two parts of your own IP address XXX.XXX followed by .0.10:
Product IP number: 192.168.1.10
22