User Manual
Table Of Contents
- 1. What’s in the Box
- 2. Camera Connection
- 3. Installation Diagram and Considerations
- 3.1. Installation Diagram
- 3.2. Installation Considerations
- 4. Monitoring PC System Requirements
- 4.1. Hardware
- 5. Installation Environment Before Installation
- 5.1. Check Windows 10 Version
- 5.2. Windows Update
- 5.3. Display Setting
- 5.4. Power and Sleep
- 6. Software Download and Installation
- 6.1. Download Software and Camera Network Configuration
- 6.2. Install the Software
- 7. Program Installation
- 8. Software Elements
- 8.1. Connection Information
- 8.2. Functions
- 8.3. Maximum Temperature Indication Window
- 8.4. Alarm setting
- 8.5. History
- 8.6. Top Navigation Bar
- 8.7. Main Display
- 8.8. Blackbody Status
- 8.9. Status
- 9. Run Program
- 10. Specifications
- 11. FAQs
- 11.1. Usability
- 11.2. Hardware Related
- 11.3. Compatibility
- 11.4. Compliance
- 12. Warranty Information
- 13. Limits and Exclusions
DW E.S.T. (Elevated Skin Temperature) System
-3-
1. What’s in the Box
Review and make sure the following is included in the box with your camera:
• DW-EST: Camera, Blackbody, 2x tripods, 2x DC12V power adapter, QSG.
• DW-ESTCAM: Camera, DC12V power, QSG.
• DW-ESTBLKB: Blackbody, DC12V power, QSG.
2. Camera Connection
Follow the connection diagram below to connect the camera to all external devices.
<Camera back-panel connections>
1. AC/DC Adapter – Connect the power adapter to the camera. When the camera is connected to a
proper power supply, the red light will turn on.
2. Mini-true HD Output – Connect to a monitor.
3. RJ45 (Ethernet) Output – The camera transmits raw data to the monitoring PC via an RJ45
connection. The LED lights up when data is transmitted and received.
4. Alarm Output (Digital Output) – The camera can be integrated into an access control solution using
two (2) digital outputs.
5. Analogue Video Output – Secondary video output for local output during the installation.
6. Color Camera Cable (Visible Camera) – The USB 3.0 cable connects the camera to the monitoring
PC via a USB 3.0 port to get the visible camera’s video output.