User Manual

DW E.S.T. (Elevated Skin Temperature) System
-28-
Temperature stability
±0.18°F (±0.1℃)
Temperature accuracy
±0.36°F (±0.2℃)
Emissivity 0.95
Temperature sensor NTC 0.1%
Weight 0.72 lbs. (330 gr.)
Dimension (H x W x D) 2.83 x 2.83 x 1.92" (72 x 72 x 49mm)
Power supply 110/220 VAC to 12VDC adaptor 36W(3A), 90° angle jack
Recommended distance from
the camera
Between 9.8 to 14.7ft (2m to 4m). 10ft is recommended. Install Blackbody at
9.8 to 14.7ft (2m to 4m) apart from the camera on a tripod, the wall, or the
ceiling. The closer people walk by the Blackbody, the more accurate the
temperature reading will be).
Recommended installation
height
5ft
Operation Temperature
14°F ~ 104°F (-10℃ ~ 40℃), under 80% humidity
Warranty
2 year warranty
* Specifications are subject to change without notice.
NOTE: To increase the skin temperature measurement accuracy, the camera transmits raw temperature
data of all the pixels in the thermal sensor to the PC software via the Ethernet cable. The Elevated Skin
Temperature Software program processes the raw data using the PC’s processing capacity.
If the installation includes a Blackbody, the temperature data in each pixel is calibrated based on the 104°F
(40°C) temperature of the Blackbody. This increases the system’s accuracy up to ±0.36°F/0.2°C.
The Elevated Skin Temperature Software program performs various analyses to mark a person's faces and
skin temperature, on images from both the visible and thermal cameras.