User Manual
Table Of Contents
- 1. What’s in the Box
- 2. Camera Connection
- 3. Installation Diagram and Considerations
- 3.1. Installation Diagram
- 3.2. Installation Considerations
- 4. Monitoring PC System Requirements
- 4.1. Hardware
- 5. Installation Environment Before Installation
- 5.1. Check Windows 10 Version
- 5.2. Windows Update
- 5.3. Display Setting
- 5.4. Power and Sleep
- 6. Software Download and Installation
- 6.1. Download Software and Camera Network Configuration
- 6.2. Install the Software
- 7. Program Installation
- 8. Software Elements
- 8.1. Connection Information
- 8.2. Functions
- 8.3. Maximum Temperature Indication Window
- 8.4. Alarm setting
- 8.5. History
- 8.6. Top Navigation Bar
- 8.7. Main Display
- 8.8. Blackbody Status
- 8.9. Status
- 9. Run Program
- 10. Specifications
- 11. FAQs
- 11.1. Usability
- 11.2. Hardware Related
- 11.3. Compatibility
- 11.4. Compliance
- 12. Warranty Information
- 13. Limits and Exclusions
DW E.S.T. (Elevated Skin Temperature) System
-26-
Once the initializing stage is complete, the facial skin temperature will be displayed when a face is detected.
The temperature display will show the highest skin temperature detected. If there is more than one person in
the camera’s view, each face detected will be framed in a blue frame, with the skin temperature shown for
each person.
<Initialization step> <Face detection step>
<Highest skin temperature recorded <Highest skin temperature recorded within
not within the Alarm Setting range> the Alarm Setting range>
Below is a simple flow chart that shows events that take place for an alarm to be registered and a JPEG to
be captured and saved locally.