User Manual
Table Of Contents
- 1. What’s in the Box
- 2. Camera Connection
- 3. Installation Diagram and Considerations
- 3.1. Installation Diagram
- 3.2. Installation Considerations
- 4. Monitoring PC System Requirements
- 4.1. Hardware
- 5. Installation Environment Before Installation
- 5.1. Check Windows 10 Version
- 5.2. Windows Update
- 5.3. Display Setting
- 5.4. Power and Sleep
- 6. Software Download and Installation
- 6.1. Download Software and Camera Network Configuration
- 6.2. Install the Software
- 7. Program Installation
- 8. Software Elements
- 8.1. Connection Information
- 8.2. Functions
- 8.3. Maximum Temperature Indication Window
- 8.4. Alarm setting
- 8.5. History
- 8.6. Top Navigation Bar
- 8.7. Main Display
- 8.8. Blackbody Status
- 8.9. Status
- 9. Run Program
- 10. Specifications
- 11. FAQs
- 11.1. Usability
- 11.2. Hardware Related
- 11.3. Compatibility
- 11.4. Compliance
- 12. Warranty Information
- 13. Limits and Exclusions
DW E.S.T. (Elevated Skin Temperature) System
-24-
includes the current date and time. If a Blackbody is installed, it will be detected automatically by the software
in the camera’s view and marked with a yellow frame.
<Software Main View> <Blackbody Detection>
The recommended location for the Blackbody installation: The
Blackbody cannot be installed in a crowded location. Install the
Blackbody within the red ellipse marked within the image on the left.
This is the best location for on-site constant auto-calibration for
accurate temperature measurements (±0.36°F/0.2°C).
If the mouse cursor is left motionless on the thermal camera’s view for more than one second, the system will
display the screened temperature for that area.