User Manual
Table Of Contents
- 1. What’s in the Box
- 2. Camera Connection
- 3. Installation Diagram and Considerations
- 3.1. Installation Diagram
- 3.2. Installation Considerations
- 4. Monitoring PC System Requirements
- 4.1. Hardware
- 5. Installation Environment Before Installation
- 5.1. Check Windows 10 Version
- 5.2. Windows Update
- 5.3. Display Setting
- 5.4. Power and Sleep
- 6. Software Download and Installation
- 6.1. Download Software and Camera Network Configuration
- 6.2. Install the Software
- 7. Program Installation
- 8. Software Elements
- 8.1. Connection Information
- 8.2. Functions
- 8.3. Maximum Temperature Indication Window
- 8.4. Alarm setting
- 8.5. History
- 8.6. Top Navigation Bar
- 8.7. Main Display
- 8.8. Blackbody Status
- 8.9. Status
- 9. Run Program
- 10. Specifications
- 11. FAQs
- 11.1. Usability
- 11.2. Hardware Related
- 11.3. Compatibility
- 11.4. Compliance
- 12. Warranty Information
- 13. Limits and Exclusions
DW E.S.T. (Elevated Skin Temperature) System
-19-
8.3. Maximum Temperature Indication Window
The temperature section on the left of the software’s view shows the temperature measured currently. During
the software’s initializing period, "Initializing..." is displayed in this section.
If no people or no faces are detected in the camera’s FOV for skin temperature measurement, the image
below will display.
<Temp. reading within set threshold> <Temp. reading outside the set threshold>
When there are multiple people in the camera’s FOV, the section will show the highest skin temperature
recorded.
If “Alarm On” is selected on the function bar, the color of the text will change as the detected skin temperatures
fall within the set threshold, above the threshold, or below the threshold.
<Temperature reading within threshold> <Tem perature reading outside the threshold>
Note: If “Alarm Off” is set on the function bar, the temperature values shown here will remain blue even if
they fall outside of the set threshold.