User Manual
Table Of Contents
- 1. What’s in the Box
- 2. Camera Connection
- 3. Installation Diagram and Considerations
- 3.1. Installation Diagram
- 3.2. Installation Considerations
- 4. Monitoring PC System Requirements
- 4.1. Hardware
- 5. Installation Environment Before Installation
- 5.1. Check Windows 10 Version
- 5.2. Windows Update
- 5.3. Display Setting
- 5.4. Power and Sleep
- 6. Software Download and Installation
- 6.1. Download Software and Camera Network Configuration
- 6.2. Install the Software
- 7. Program Installation
- 8. Software Elements
- 8.1. Connection Information
- 8.2. Functions
- 8.3. Maximum Temperature Indication Window
- 8.4. Alarm setting
- 8.5. History
- 8.6. Top Navigation Bar
- 8.7. Main Display
- 8.8. Blackbody Status
- 8.9. Status
- 9. Run Program
- 10. Specifications
- 11. FAQs
- 11.1. Usability
- 11.2. Hardware Related
- 11.3. Compatibility
- 11.4. Compliance
- 12. Warranty Information
- 13. Limits and Exclusions
DW E.S.T. (Elevated Skin Temperature) System
-10-
NOTE: Make sure the PC’s IP address is not overlapping with the camera’s IP address. The PC’s IP setting
ranges arbitrarily from 169.254.100.1 ~ 169.254.100.254. Make sure to set the subnet mask to 255.255.0.0.
9. Click the ‘OK’ button in the Ethernet Properties window to close the window.
10. To test the connection with the camera, open the execution window by using “Windows Key ( ) + R”
on the keyboard.
11. Enter ‘cmd’ in the execution window and press the ‘Enter’ key.
12. Enter ‘ping 169.254.100.100’ (if the camera has been manually assigned to a different IP address, enter
that IP instead) and press the ‘Enter’ key.
<Connection successful> <Connection failed. If this happens,
change the LAN cable and check
the subnet mask.>