User Manual

49 | Compressor™ Onvif Encoder
4.5.4
Video Loss > Setup
To set Video Loss across channels
Figure 4-32 Event > Video Loss > Setup
Table 4-31 Event > Video Loss > Setup Item and Description
No.
Name
Function
1 CH Show channel’s number.
2 Use Enable video loss event for each channel.
3 Beep Set a beep sound when video loss is detected. Select from the available length
options (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10 min, 30 min, and 1 hour).
4 Alarm Set an alarm output when video loss is detected.
5 Noti. Set an e-mail notification when video loss is detected.
6 Preset Set a PTZ camera to move to a specific preset when video loss is detected.
7 Copy to Video Loss
Setup
Copy the Video Loss set value to other channels.
Note
Placing your mouse on
Alarm, Noti., Preset
and clicking editing icon ( ) in right corner
displays
Event: Video Loss
screen. For more information about
Event: Video Loss
screen,
see section “
4.5.2 Alarm In > Setup in Alarm In.”