User Manual

47 | Compressor™ Onvif Encoder
4.5.3
Motion
Set and schedule motion detection for each of the system’s channels.
4.5.3.1
Motion > Setup
Set motion detection
Figure 4-30 Event > Motion > Setup
Table 4-29 Event > Motion > Setup Item and Description
No.
Name
Function
1 CH Show channel’s number.
2 Use Enable motion detection for each channel.
3 Area Display the motion detection area.
4 Sens. Select the sensitivity level for motion detection (Level 1~10).
5 Beep Set a beep sound when motion is detected. Select from the available length
options (null, 5 sec, 10 sec, 20 sec, 30 sec, 1 min, 10 min, 30 min, and 1 hour).
6 Alarm Set an alarm output when motion is detected.
7 Noti. Set an e-mail notification when motion is detected.
8 Preset Set a PTZ camera to move to a specific preset when motion is detected.
9 Copy to motion
setup
Apply setting from a selected channel to multiple channels.
Note
Placing your mouse on
Alarm, Noti., Preset
and clicking editing icon ( ) in right corner
displays Event: Alarm screen. For more information about
Event: Motion
screen, see section
“
4.5.2 Alarm In > Setup in Alarm In.”