User Manual

45 | Compressor™ Onvif Encoder
Click on the editing Icon ( ) next to
Alarm, Group Rec, Noti., Preset
to show the following screen:
Figure 4-28 Event > Alarm In > Setup > Event: Alarm
Table 4-27 Event > Alarm In > Setup > Event: Alarm Item and Description
No.
Name
Function
1 Alarm-out Set the alarm.
•
Relay: enable a relay output when an event occurs.
•
Dwell time: set a duration for an alarm (Keep, 5 sec, 10 sec, 20 sec, 30 sec, 1
min, 10 min, 30 min, and 1 hour)
2 Monitor popup Enable a monitor popup when an event occurs.
3 Select which channel to popup on the monitor when an event occurs.
3 Remote notification Setup an e-mail or push notifications to your smart phone when an event occurs.
4 Preset Preset of PTZ camera is running.
•
Use: enable a PTZ camera’s preset as an action when an event occurs.
•
CH: select channels. Please note a PTZ camera must be connected to the
channel.
•
Preset: enter the preset value.