User Manual

User manual | 34
4.3.2 Advanced
Set camera video, stream and privacy mask settings for each channel.
4.3.2.1 Advanced > Scan Mode
Use this screen to adjust the signal detected from the camera as needed. The system supported HD-Analog and
HD-TVI. You can also setup the signal detection to auto, allowing the system to detect the signal automatically.
Figure 4-16 CAMERA > Advanced > Scan Mode
Table 4-15 CAMERA > Advanced > Scan Mode Item and Description
No.
Name
Function
1 CH Display channels.
2 Scan mode Automatically detects the camera’s signal type (Auto, HD-Analog, and HD-TVI).
3 Copy scan
mode
Copy the current settings to other channels.
4.3.2.2 Advanced > Advanced
Setup each channels’ brightness, contrast and color and set privacy masks in the cameras’ field of view (FoV).
Figure 4-17 CAMERA > Advanced > Advanced