User Manual

29 | Compressor™ Onvif Encoder
To add a new user group, press “
Add Group”. The
screen below will appear. You can setup the specific permission
levels for this group on this page. You can allow all users assigned to the group access to live view, PTZ control,
access to the setup menu, or firmware update rights. You can also assign specific channels or limit what channels
users in the group can view. You must have at least one group setup to add users (see below).
Figure 4-9 SYSTEM > Account > User > Add Group
Table 4-8 SYSTEM > Account > User > Add Group Item and Description
No.
Name
Function
1 Name Enter the group’s name.
2 Permission Select the access level for this group.
3 Select what channels to permit users in the group access to.
To add a user, press “
Add User”. The setup window below will appear.
Enter the new user’s name, user ID and
password and assign to a group.
Figure 4-10 SYSTEM > Account > User > Add User
Table 4-9 SYSTEM > Account > User > Add User Item and Description
No.
Name
Function
1 Name Enter the user name.
2 ID Enter the user ID. This will be the ID used to log into the system.
3 Password Enter the password.
4 Confirm password Confirm the password.
5 Group Select to the group to which belongs.